Product Description
WS-C3750X-24T-L
Details: Cisco Systems WS-C3750X-24T-L Catalyst 3750X 24 Port Data LAN Base
Cisco Catalyst 3750-X Series primary features:• 24 and 48 10/100/1000 PoE+ and non-PoE models
• Optional four Gigabit Ethernet (GbE) SFP or two 10GbE SFP+ uplink network modules
• Industry first PoE+ with 30W power on all ports in 1 rack unit (RU) form factor
• Dual redundant, modular power supplies and fans
• Media Access Control Security (MACsec) hardware-based encryption
• IPv4 and IPv6 routing, Multicast routing, advanced quality of service (QoS), and security features in hardware
• Enhanced limited lifetime warranty (LLW) with next business day (NBD) advance hardware replacement and 90 day access to Cisco Technical Assistance Center (TAC) support
• Enhanced Cisco EnergyWise for operational cost optimization by measuring actual power consumption of the PoE devices, reporting, and reducing energy consumption across the network
• USB Type-A and Type-B ports for storage and console respectively and an out-of-band Ethernet management port.
• Cisco StackPower™ technology: An innovative feature and industry first for sharing power among stack members
• Cisco StackWise Plus technology for ease of use and resiliency with 64 Gbps of throughput
• Investment protection with backward compatibility with all other models of Cisco Catalyst 3750 Series Switches
Technical Specifications
Manufacturer Part Number |
WS-C3750X-24T-L |
Product Type |
Switch - 24 ports - Managed - stackable |
Form Factor |
Fixed, Rack Mountable 1U, Stackable/Clustering |
Switch Port density - Uplinks |
24 x 10/100/1000 Ethernet Ports |
Performance |
Switching capacity : 160 Gbps Forwarding performance : 65.5 Mpps |
Capacity |
Virtual interfaces (VLANs) : 1005 |
Jumbo Frame Support |
9216 |
Max Number of Stacks |
9 |
Remote Management Protocol |
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI |
Authentication Method |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Features |
Hot swap module replacement, Layer 2 switching, dynamic IP address assignment , DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN) |
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
DRAM Memory |
256 MB |
Flash Memory |
128 MB Flash |
LED Status Lights Indicators |
Port status, link activity, port transmission speed, port duplex mode, power, system |
Connectivity / Expansion Slots | |
---|---|
Interfaces |
24 x 10Base-T/100Base-TX/1000Base-T - RJ-45 USB : 1 x 4 PIN USB Type A 1 x console - mini-USB Type B - management 1 x RS-232 - RJ-45 - management 1 x 10Base-T/100Base-TX - RJ-45 - management Network stack device : 2 x |
Expansion Slot(s) |
1 (total) / 1 (free) x Expansion Slot |
Power Supply Specifications | |
Power Device |
Power supply - redundant - plug-in module |
Installed Qty |
1 (installed) / 2 (max) |
Power Redundancy |
Optional |
Power Redundancy Scheme |
1+1 (with optional power supply) |
Voltage Required |
AC 120/230 V ( 50/60 Hz ) |
Features |
Redundant Power System (RPS) connector |