Product Description
CISCO WS-C4948E-F-E
Details : Cisco Systems WS-C4948E-F-E Cat 4948E-F, ES, 48x 10/100/1000+ 4 SFP+, AC PS, Fr Ext
WS-C4948E-F-E belongs to the Cisco Catalyst 4900 Series Switches, it widely used in low density, multilayer aggregation of high performance servers and workstations. The Cisco Catalyst 4948E-F Ethernet Switch is built from the start to deliver class-leading, full-featured server-access switching. The switch offers forty-eight 10/100/1000 Gbps RJ45 downlink ports and four 1/10 Gigabit Ethernet uplink ports and is designed to simplify data center architecture and operations by offering service provider-grade hardware and software in a one Rack Unit (1RU) form factor optimized for full-featured Top-of-Rack (ToR) data center deployments. The Cisco Catalyst 4948E-F, with its advanced multicast support, is optimized for multimedia applications. It supports Protocol Independent Multicast (PIM), Source-Specific Multicast (SSM), and Pragmatic General Multicast (PGM), providing end users with additional scalability to support multimedia applications. Also supported are Internet Group Management Protocol (IGMP) snooping and Multicast Listener Discovery (MLD) snooping in hardware, enhancing performance and reducing network traffic by allowing a switch to dynamically add and remove hosts from a multicast group.
Cisco WS-C4948E-F-E Switch Specifications
Device Type | Switch - 48 ports - L3-Managed |
Enclosure Type | Rack-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 48 x 10/100/1000 + 4 x SFP+ |
Performance | Switching capacity : 176 Gbps ¦ IPv4 switching : 131 Mpps ¦ IPv6 switching : 110 Mpps |
Capacity | Active VLANs: 4094 ¦ QoS hardware entries: 32000 ¦ Spanning Tree Protocol instances: 4094 ¦ Switched virtual interfaces (SVIs): 4094 |
MAC Address Table Size | 55K entries |
Routing Protocol | OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, IGMPv2, HSRP, IGMP, DVMRP, VRRP, OSPFv2, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, MLDv2, MLD |
Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTPS, TFTP, SSH, SSH-2, CLI |
Features |
Hot swap module replacement, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, VLAN support, IGMP snooping, traffic shaping, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Non-Stop Forwarding (NSF), Spanning Tree Protocol (STP) support, Per-VLAN Spanning Tree (PVST), tunnelling, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support,Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR), back to front airflow, Per-VLAN Spanning Tree Plus (PVST+), EIGRP Stub Routing |
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag |
Power | AC 120/230 V ( 50/60 Hz ) |
Power Redundancy | Optional |
Dimensions (WxDxH) | 44.5 cm x 49.3 cm x 4.4 cm |
Weight | 8.6 kg |