Product Description
WS-X6148A-GE-45AF / MBPS Ethernet Module
Details : Cisco Systems WS-X6148A-GE-45AF Cat6500 48-Port PoE 802.3af & ePoE 10/100/1000 w/Jumbo Frame
Designed for deployment in wiring closets, high-density Cisco Catalyst 6500 Series Classic 10/100 and 10/100/1000 interface modules provide line-rate 10/100 Ethernet forwarding and gigabit bandwidth to the desktop capabilities. These interface modules feature PoE field-installable daughter cards for pay-as-you-grow investment protection and flexibility.
Cisco Gigabit Ethernet Interface Module provides proven and widely deployed Cisco AVVID (Architecture for Voice, Video and Integrated Data) wiring closet solution. This module is the most widely deployed Cisco IP Telephony port enabled campus switch.
Technical Specifications :
Standard protocols |
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an |
Physical specifications |
● Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis● Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)● Weight:◦ Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2◦ Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK |
Environmental conditions |
Operating temperature:● Agency-certified for operation: 32 to 104°F (0 to 40°C)● Design and tested for operation 32 to 130°F (0 to 55°C)● Storage temperature: –40 to 167°F (–40 to 75°C)● Relative humidity: 10 to 90 percent, noncondensingOperating altitude:● Agency-certified for operation: –500 to 6500 ft (–150 to 2000m)● Designed and tested for operation –500 to 10000 ft (–150 to 3000m) |
Regulatory compliance |
Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:EMC Standards:● FCC Part 15 (CFR 47) Class A● ICES-003 Class A● VCCI Class A● EN55022 Class A● EN55024● CISPR24● CISPR 22 Class A● AS/NZS CISPR 22 Class A● ETS 300 386● KN 22 Class A● EN 50082-1● EN61000-3-2● EN61000-3-3● EN61000-6-1● CNS13438 Class A● KN6100 -4 SeriesSafety Standards:● UL 60950-1● CAN/CSA C22.2 No. 60950● EN 60950-1● IEC 60950-1● AS/NZS 60950-1● IEC 60825 Class 1● EN 60825 Class 1● 21CFR 1040 |
NEBS criteria levels |
SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) |
ETSI |
● ETS 300 019-2-1, Class 1.1 Storage● ETS 300 019-2-2, Class 2.1 and 2.2 Transportation● ETS 300 019-2-3, Class 3.1E Stationary Use |
Network management |
● ETHERLIKE-MIB (RFC 1643)● IF-MIB (RFC 1573)● Bridge MIB (RFC 1493)● CISCO-STACK-MIB● CISCO-VTP-MIB● CISCO-CDP-MIB● RMON MIB (RFC 1757)● CISCO-PAGP-MIB● CISCO-STP-EXTENSIONS-MIB● CISCO-VLAN-BRIDGE-MIB● CISCO-VLAN-MEMBERSHIP-MIB● ENTITY-MIB (RFC 2037)● HC-RMON● RFC1213-MIB (MIB-II)● SMON-MIB |
Power requirements |
● WS-X6716-10T-3C: 509.3W (12.1A @ 42V)● WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V)● WS-X6716-10G-3C: 457.8W (10.9A @ 42V)● WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V)● WS-X6708-10G-3C: 444.36W (10.58A @ 42v)● WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)● WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V)● WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V)● WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)● WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)● WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)● WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V) |
Indicators |
● Status: green (operational), red (faulty), and orange (module booting)● Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected) |