Product Description
WS-X6704-10GE
Cisco Systems WS-X6704-10GE Cat6500 4-port 10 Gigabit Ethernet Module (req. XENPAKs)
Cisco Systems WS-X6704-10GE Cat6500 4-port 10 Gigabit Ethernet Module (req. XENPAKs)As Cisco's premier modular multilayer switch, the Catalyst 6500 series delivers secure, converged services from the wiring closet to the core, from the data center to the WAN edge. Designed for Enterprise datacenter, distribution and core deployments, the high-density four port 10GE module is fully 802.3ae standards compliant using industry-standard modular optics to meet a wide range of station to station deployment lengths. Supporting 40Gbps interconnection to the Cisco Catalyst 6500 Supervisor Engine 720's integrated 720Gbps switch fabric, this module uses accelerated Cisco Express Forwarding (dCEF) delivering peak system throughput of up to 400Mpps. Up to 32 10 Gigabit Ethernet ports can be deployed in a 9 slot Catalyst 6509 chassis.WS-X6704-10GE consists of 4 XENPAK 10 Gigabit Ethernet fiber ports line card module for Cisco Catalyst 6500 series and 7600 series.* WS-X6704-10GE is designed for Core, interbuilding connections, POPs, WAN edge and MAN connections. WS-X6704-10GE comes with WS-F6700-CFC daughter card to provide centralized forwarding rate up to 30Mpps and no offering any local forwarding capabilities. WS-X6704-10GE holds the option to replace the CFC to DFC3 daughter card to provide distributed forwarding (dCEF).* When integrated with DFC3C or DFC3CXL daughter card with this line card along with supervisor engine 720-10G-3C or 720-10G-3CXL, the system enables VSS 1440 functionality which enhances the overall system bandwidth to increase operational efficiency.
Technical Specifications :
Standard protocols | IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an |
Physical specifications | ● Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis● Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)● Weight:◦ Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2◦ Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK |
Environmental conditions | Operating temperature:● Agency-certified for operation: 32 to 104°F (0 to 40°C)● Design and tested for operation 32 to 130°F (0 to 55°C)● Storage temperature: –40 to 167°F (–40 to 75°C)● Relative humidity: 10 to 90 percent, noncondensingOperating altitude:● Agency-certified for operation: –500 to 6500 ft (–150 to 2000m)● Designed and tested for operation –500 to 10000 ft (–150 to 3000m) |
Regulatory compliance | Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:EMC Standards:● FCC Part 15 (CFR 47) Class A● ICES-003 Class A● VCCI Class A● EN55022 Class A● EN55024● CISPR24● CISPR 22 Class A● AS/NZS CISPR 22 Class A● ETS 300 386● KN 22 Class A● EN 50082-1● EN61000-3-2● EN61000-3-3● EN61000-6-1● CNS13438 Class A● KN6100 -4 SeriesSafety Standards:● UL 60950-1● CAN/CSA C22.2 No. 60950● EN 60950-1● IEC 60950-1● AS/NZS 60950-1● IEC 60825 Class 1● EN 60825 Class 1● 21CFR 1040 |
NEBS criteria levels | SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) |
ETSI | ● ETS 300 019-2-1, Class 1.1 Storage● ETS 300 019-2-2, Class 2.1 and 2.2 Transportation● ETS 300 019-2-3, Class 3.1E Stationary Use |
Network management | ● ETHERLIKE-MIB (RFC 1643)● IF-MIB (RFC 1573)● Bridge MIB (RFC 1493)● CISCO-STACK-MIB● CISCO-VTP-MIB● CISCO-CDP-MIB● RMON MIB (RFC 1757)● CISCO-PAGP-MIB● CISCO-STP-EXTENSIONS-MIB● CISCO-VLAN-BRIDGE-MIB● CISCO-VLAN-MEMBERSHIP-MIB● ENTITY-MIB (RFC 2037)● HC-RMON● RFC1213-MIB (MIB-II)● SMON-MIB |
Power requirements | ● WS-X6716-10T-3C: 509.3W (12.1A @ 42V)● WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V)● WS-X6716-10G-3C: 457.8W (10.9A @ 42V)● WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V)● WS-X6708-10G-3C: 444.36W (10.58A @ 42v)● WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)● WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V)● WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V)● WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)● WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)● WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)● WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V) |
Indicators | ● Status: green (operational), red (faulty), and orange (module booting)● Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected) |